iPhone 13 Pro LCD Display + Touch Unit Diagnostic Tactical True Color

Product detailed description

Tactical True Color replacement LCD display with touch glass and frame. Tactical True Color displays excel with 100% identical mi viewing mi angles and dimensions and exceptionally low power consumption, which is up to 30% lower than conventional non-branded displays, thus extending battery life. They are made with advanced technology that ensures exceptional resistance to damage when dropped, but also to scratches. True Tone support is a given for clear color reproduction, as well as Haptic Touch. Precise touch response, perfect fit and design. The displays are factory-applied with an oleophobic coating, against fingerprints and easy cleaning during normal use. If your display has been damaged by a fall or is scratched or otherwise damaged, the Tactical True Color display is the best choice for replacement. Features: - display type incell LCD - Brightness 550 - 650 nits - True Color for color reproduction like the original - Support HDR for vivid colors and details - 30% lower power consumption - significantly increased resistance to damage - True Tone support - Haptic Touch for intuitive control - Precise touch response - Perfect workmanship and fit - Oleophobic coating for protection against fingerprints and better cleaning - LCD Does not support the automatic brightness function. - Support 120Hz This part can independently perform diagnostics by following these steps: 1) Click "Restart and complete repair" 2) then click "Continue" 3) Connect to the WiFi network 4) Agree to the company Apple collecting diagnostic data. 5) Wait for the configuration to complete 6) Click "Continue" 7) Wait for the next configuration to complete 8) Then everything is done LCD will not appear as unknown. Contains: LCD Display Glass with touch with Haptic touch Frame in the color of the phone For proper function Face ID the system must be updated to IOS 15.2 Warning: Pay attention to antistatic protection: Work on an antistatic mat and use an antistatic wristband if necessary. Check that all parts that could be subject to static electricity are properly taped with antistatic tape. LCD Before installation, test properly (touch functionality, colors, brightness, sensor functionality, correctness of pixel display) Perform the installation with the battery disconnected and make sure that the connectors are properly connected to each other, after installation, perform a proper check again. If the part is not replaced by an authorized service center, the used part is not covered by the warranty.